Have you ever seen the satellite map of your area? Your homes,parks,fish ponds,and roadways and how they resemble tiny blocks. In some cases you are able to recognize which residence belongs to which family. However what regarding a place that does not have a area yet? The location is yet to be created and the individual that supervises the making of the area will need to develop a preparation application first. This preparation application will certainly require a site location map,a plan that will show the specific proposition .
This plan,in addition to the particular local map will have a precise block plan that will show the development in detail.
Maps made use of in site location plans
High-grade mapping is of utmost significance when you are making a site location plan. Your site location plan will be insufficient if you do not support it with particular maps. Even the regional council will request the map when you go to submit the last draft of the plan. The site location plan maps are basically based upon the Ordnance Survey Mastermap information. It is essential that the map gets approved; or else,the site planning and preparation will never ever be able to move ahead.
Considering that the map will be based upon the information collected by Ordnance Survey Mastermap and approved by the National Mapping Agency of Great Britain,it is guaranteed that the map will certainly be accepted by the regional council as well as by the planning division.
Details of site location plans.
Every siteplan in the UK has a specific format that you need to adhere to. Likewise,the papers you submit ought to be reviewed to ensure that they don’t get rejected in the initial stage. Below are a few of the things that you need to bear in mind while making the site location plan:
• The site location plan must always show the direction North. And also,it should be at a typical scale that shows the grids of 1:1250 or 1:2500 for the larger sites.
• The plan must be scaled correctly so that it fits either on an A3 or A4 sized paper.
• The plan must show the site border of the application as well as the land that is needed to execute the plan that has been proposed.
• There ought to be enough structures and also roadways in the proposed plan and these structures must show up on the visible land on the plan.
• The land that is required to access the actual site from the roadway needs to be detailed in red. Ideally,the area needs to be highlighted to ensure that it shows up {as soon as the plan is opened up.
• If the applicant owns any other adjacent land close to the proposed site,it ought to be detailed with a blue mark.
These are the common requirements according to the government document. You need to adhere to the above religiously to get the plan accepted. Nonetheless,the regional preparation authority may want added records or other plans. So,you ought to interact with the LPA as well while preparing the plan.
There are lots of councils that request 2 named roadways on the plan to ensure that they can identify the specific place of the development. Once the plan and the map gets approved,you will need to submit the last files either through the internet / online or do it manually. If you are doing it online (which is the quicker method),you will certainly need to submit PDF files.
We hope that this small article helps with any site location maps you are going to create in the future,and if you need more help,can we suggest you visit Promap.co.uk